The composition of aluminum alloy scaffolding is introduced in detail

A SET OF COMPLETED ALUMINUM SCAFFOLD COMPONENTS shall include: FRAME, horizontal tie bar, OBLIQUE tie bar, H GUARDRail, skirTING BOARD, PLATFORM BOARD (must ensure that every 2 meters height of at least ONE platform board), universal casters, adjustable legs, oblique support, etc. The specific details are as follows: aluminum frame: general aluminum alloy scaffold framework is mainly made of φ50.8xδ2 or φ50.8xδ1.8 aluminum alloy tube welding.

The advantages of aluminum alloy quick loading scaffold are introduced

Modern science and technology develop rapidly, new technology, new process, new data are progressing from time to time. In this case, with the emergence of new high strength data from time to time, the application of high strength aluminum alloy data is more and more common. Aluminum quick - loading scaffolding is an example of a successful application.

How do mobile scaffolding manufacturers choose to move scaffolding

Modern science and technology are developing rapidly, and new technologies, materials and technologies are emerging in an endless stream. In this situation, new high strength materials emerge one after another, high strength magnesium alloy materials are more and more widely used. With the good performance of aluminum alloy fast fashion has been gradually recognized by the society, it has been widely used in many domestic enterprises and institutions, hotels, equipment maintenance, cleaning and cleaning, so how to choose mobile scaffolding manufacturers, let's take a look together!

What are the characteristics of aluminum alloy quick loading scaffold?

Traditional scaffolding is poorly designed and usually comes in two forms, one is fastener type and the other is door type. The fastener type is flexible but obviously has the following disadvantages; Large size, easy to rust, need wrenches and other tools, installation process laborious, careless installation will hurt workers. The installation time is long and the construction efficiency is low. Portal (portal) scaffold structure design has a big defect. The overall structure of portal frame is not coherent. In order to facilitate access, the bottom transverse passage is disconnected, and the overall structure is not firm. The transverse bar is cross-shaped, and there is no transverse bar connection between layers. The bolts are connected only by bolts, which are generally not fixed on the scaffold, but independently separated. There are great defects in the design of this kind of portal scaffolding, and it is generally not recommended to pile up high, which may cause great safety risks.

Introduction to the application of insulating scaffolding

At present, insulation quick installation scaffolding products are widely used in the power industry, such as transformation maintenance, line climbing, live work of distribution network, live work of main network and so on. The electric power industry standard DL/ year for insulation quick installation scaffolding has been incorporated into the State Grid Company's safety equipment management regulations.

What are the key points in installing insulated scaffolding

It is necessary to look at all the parts that will be used before looking at the formal setup of the parts used. Once found damaged or defective products should be replaced immediately. Many people ignore the view on the ground, which is not true. In actual use, the phenomenon of soft ground should not be removed, or more precautions should be taken. See if the movable scaffold can be set up and moved on it and can support the weight of the scaffold.

The specific introduction of aluminum alloy scaffolding

A set of finished aluminum alloy scaffolding components should include: structure, horizontal tie rod, oblique tie rod, H guardrail, baseboard, channel plate (must ensure that every 2 meters height of at least one channel plate), universal casters, adjustable legs, oblique support, etc. The specific details are as follows: aluminum structure: general aluminum alloy scaffold structure is mainly selected φ50.8xδ2 or φ50.8xδ1.8 aluminum alloy tube welding.

What are the steps for the installation and erection of aluminum alloy quick installation scaffolding?

Aluminum alloy quick loading scaffold has the advantages of light weight, easy installation, handling and storage. Adopt "building block" design, parts standardization, no loose parts. Without any installation tools, two workers can build a working platform with a height of 20m in a short time. The following are the installation steps of aluminum alloy quick loading scaffold: